Connecticut

Specifications:
	Model 816	Model 1016	Model 1018
Length of bed	97"	121"	121"
Capacity on mild steel, 1" flange;     With bending bar and angle in place     With bending angle removed     With bending bar and angle removed	6 ga. 20 ga. 23 ga.	16 ga. 20 ga. 23 ga.	18 ga. 22 ga. 25 ga
Minimum reverse bend (bar and angle removed)	1/4"	1/4"	1/4"
Maximum lift of beam	1 5/8"	2 1/4"	1 5/8"
Front to rear adjustment of beam	1 1/8"	1 3/8"	1 1/8"
Shipping Weight	1640 lbs	2660 lbs.	220 lbs.

 

---

Autobrake 2000

Offered in a range of models from 4-feet to 13-feet, and capacities through 1/4" steel, the Autobrake 2000 is designed to meet the needs of jobs shops, metal roofing contractors, and architectural sheet metal fabricators. These CNC metal folding systems incorporate automatic gauging, clamping, and pivot bending for versatile, efficient part production. Bending and gauge positioning accuracy allow a wide range of parts to be fabricated with repeat precision.

• Computer Controlled
• Dual Clamping System
• Powerful Bending System
• Universal Tooling
• Patented Kombi™ Beam
• CNC Backgauge

 

---

 

Automax Mark 3 folding systems are available in a variety of capacities and sizes, ranging from
18-gauge to 10-gauge mild steel bending capacity and 16 to 40 feet lengths. It's high speed hydraulic system
and precision bending components yield fast reliable part production. The Automax uses a
Windows® based Orion CNC control system with an Intel® Pentium® processor and a touch-based
graphical user interface and has the capability to store over one million part programs on it's 10 gigabyte hard drive.

• Independent 4-point leveling on each base
• Tie-downs and levelers are coaxial, eliminating twist
• Twin support channels rest directly on the shop floor, fully supporting the machine
  
  
• Fast, accurate material gauging with CNC controlled two-stage finger assemblies
• Flexible positioning or spacing for gauge finger assemblies for a wider range of part sizes
• Less marring and easier part handling using spring steel stops
• Increased accuracy with rotating front gauging fingers
• Telescoping backgauge covers provide a variety of support positions for work material
  
  
• NFPA hydraulics
• Quiet low-profile hydraulic power unit
• Free-standing power unit for flexible set-up
• Easy access for service and maintenance
• Quick disconnect between hydraulic unit and machine
  
  
• Heavy-duty material thickness adjustment provides accurate alignment of the clamping beams
• Locking pins are easily inserted and secured into the locking plate
• 12 settings accommodate a variety of material thickness and types
• Adjustable from 28-gauge to 3/16 inch
  
  
• Wedge shaped clamping jaws provide three times the strength of other designs to yield straight bends and flat hems
• Patent pending beams with locking features that provide accurate mounting without comprising strength
• Accurate angles up to 145 degrees can be formed to +/- 1-1/2 degrees or better and programmed to within 1/10 degree for improved bending results
  

 

PRIMELINE Press Brakes are constructed of steel plate weldments amply-sized for the rigidity and stability to fully withstand the applied pressing forces and to keep deflection at the lowest possible level. They are fully hydraulic, with downstroking rams and utilize proven torsion-bar design for ram parallelism. The hydraulic system incorporates two cylinders and a high volume pump to assure quiet operation and is located for easy access. Cylinder pistons are ground, hard-chrome plated. Mechanical depth stops, which are built into the cylinders, are infinitely adjustable, and thus assure the highest level of repeatability and trueness of bend along the entire bed length. An electronic digital readout indicates the position of the stops. Stroke length can be adjusted and controlled. Two speed ram advance is standard. Controls are contained in a swiveling console mounted on the machine for convenient operation; and, there is also a movable pedestal with two-hand (palm button) control and emergency stop button. Electrics are for 3-phase, 60 Hz, 220/440 volt, with low voltage at the controls.

Standard Press Brake Models
Model	Capacity	Model	Capacity	Model	Capacity
45 X 6	6' x 45 Tons	225 X 10	10' x 225 Tons	260 X 12	12' x 260 Tons
70 X 8	8' x 70 Tons	260 X 10	10' x 260 Tons	350 X 12	12' x 350 Tons
100 X 835	8' x 100 Tons	350 X 10	10' x 350 Tons	175 X 14	14' x 175 Tons
100 X 10	10' x 100 Tons	135 X 12	12' x 135 Tons	225 X 14	14' x 225 Tons
135 X 10	10' x 135 Tons	175 X 12	12' x 175 Tons	350 X 14	14' x 350Tons
175 X 10	10' x 175 Tons	225 X 12	12' x 225 Tons

 

Standard Equipment

• Power Front-operated Back Gauge with electronic digital readout and manual fine tuning
• 2 Finger Stops
• Power Ram Adjustment with electronic digital readout
• Upper Gooseneck Forming Punch
• Multiple-opening Lower Die
• 2 Front Support Arms
• Work Light
• Sheet-metal Guards at the rear and sides of the machine
  

 

---

 

Hydraulic downstroking press brake with permanent parallelism between the beams ensured by a torsion bar of convenient size and bending depth adjustment by mechanical stops. Retrofits of CNC / DNC controls and other accessories available on option. Repeatability - 0.01 mm

Capacity	250 to 3000 KN
Length	800 to 6000 mm

 

---

Hydraulic upstroking press brake with a sturdy guiding system of the bottom beam ensured in two ways levelling. Bending depth adjustable under load. Repeatability - 0.01 mm. Daylight available on 310 and 370 mm. Big side gap. No pit required.
Retrofit of CNC / DNC controls and other accessories available on request.

Capacity	200 to 1250 kN
Length	800 to 4000 mm

 

---

Top