PRIMELINE
Press Brakes are constructed of steel plate weldments amply-sized
for the rigidity and stability to fully withstand the applied
pressing forces and to keep deflection at the lowest possible
level. They are fully hydraulic, with downstroking rams
and utilize proven torsion-bar design for ram parallelism.
The hydraulic system incorporates two cylinders and a high
volume pump to assure quiet operation and is located for
easy access. Cylinder pistons are ground, hard-chrome plated.
Mechanical depth stops, which are built into the cylinders,
are infinitely adjustable, and thus assure the highest level
of repeatability and trueness of bend along the entire bed
length. An electronic digital readout indicates the position
of the stops. Stroke length can be adjusted and controlled.
Two speed ram advance is standard. Controls are contained
in a swiveling console mounted on the machine for convenient
operation; and, there is also a movable pedestal with two-hand
(palm button) control and emergency stop button. Electrics
are for 3-phase, 60 Hz, 220/440 volt, with low voltage at
the controls.
|
Standard
Press Brake Models |
|
Model |
Capacity |
Model |
Capacity |
Model |
Capacity |
|
45 X 6 |
6' x 45 Tons |
225 X 10 |
10' x 225 Tons |
260 X 12 |
12' x 260 Tons |
|
70 X 8 |
8' x 70 Tons |
260 X 10 |
10' x 260 Tons |
350 X 12 |
12' x 350 Tons |
|
100 X 835 |
8' x 100 Tons |
350 X 10 |
10' x 350 Tons |
175 X 14 |
14' x 175 Tons |
|
100 X 10 |
10' x 100 Tons |
135 X 12 |
12' x 135 Tons |
225 X 14 |
14' x 225 Tons |
|
135 X 10 |
10' x 135 Tons |
175 X 12 |
12' x 175 Tons |
350 X 14 |
14' x 350Tons |
|
175 X 10 |
10' x 175 Tons |
225 X 12 |
12' x 225 Tons |
|
|
